VESTEL EVC04-AC Series, Service Manual, Page: 35 / 64

Page 35 of 64
Changing Output Socket
First, see “General Information and Warnings” in the beginning of the section
“4.2 Changing Main Board” , then follow Figure 1, 2 and 3 to change a broken socket.
After demounting Interlock as shown in previous section “Changing Interlock”, unscrew
the line output cables pointed by arrows in figure 1 with 3mm allen key (1Nm torque). You
can see the screw points in figure 3 (the side of the socket).
Unscrew the CP, PP cables from the side (pointed by arrows) of the socket. (slotted 4mm
tip)
Unscrew the socket screws shown in circles in figure 1, to release the socket. After that,
remove the output socket to change as shown in the figure 5 bottom.
Note that there must be cosmetic frame sticker between the output socket and cosmetic
frame (figure 5 top)
See also figure 4 for the socket connection on main board.
3
N
PE
L1
L2
L3
1
PP
CP
2
N
L1
L2 L3
PE
4