Page 34 of 64
Changing Interlock
If you need to change Interlock,
see “General Information and Warnings” in the
beginning of the section “4.2 Changing Main Board”
, then refer to pictures below.
Unscrew and remove the interlock first.
Connect the interlock cable back to the interlock and to the interlock socket (Board
Layout: 5) on mainboard. Screw the interlock back. Make sure the cable is passing
through the cable clamps and use cable ties as shown in figure below. Interlock cable is
passing through the cable clamps 1, 2 and 3.
INTERLOCK CABLE
CROSSING ON THE
CP/PP CABLE
CABLE TIES TO THESE
POINTS
1
2
3
Summary of Contents for EVC04-AC Series
