6
FRONT PANEL
REAR PANEL
!6
PHONE JACK
Connect the headphones with the impedance of
8ohm to 600ohm.
!5
MONITOR SELECT SWITCH
This switch is used to select the way of
monitoring from following.
CUE
･･････It allows you to hear input signal of
PGM1, PGM2 selected by CF MONITOR
!3
.
MASTER
･･･It allows you to hear the signal of
LINE OUT.
@1
PHONO INPUT JACK
Connect turntables equipped with MM (Moving
Magnet type) cartridge. The signal
from the turntable is fed to the PGM channels
when Phono input is selected.
@2
LINE OUT JACK
Connect to the input of power amplifier.
@3
REC OUT JACK
Connect to the input jack of the tape recorder,
MD, DAT, etc. The output level of this jack is
fixed and does not change with the MASRER
LEVEL
!0
.
@4
MIC INPUT JACK
Input jack for MIC.
!7
POWER SWITCH
Use to turn power on.
!8
POWER JACK
Connect the Vestax DC-15A, AC adaptor.
!9
GROUND TERMINAL
Connect this terminal to the ground lead of the
turntables.
@0
0
LINE INPUT JACK
Connect the equipment with line level output
(-10dB or 0dB), such as CD players,
tape decks, DATs, MDs, etc. The signal from
line level equipment is fed to the
PGM channels when Line input is selected.