5
CONTROLS AND FUNCTIONS
TOP PANEL
i
INPUT LEVEL METER
The LED level meters indicate the input signal
level of each PGM cannel.
o
CROSS FADER
When the input level of PGM1 and PGM2 are
properly set, PGM1 will be heard with the
crossfader set to the left side. PGM2 will be
heard with the cross fader set to the right side.
When the crossfader is set in the center, both
programs will be heard. This is detachable fader
for the ease of replacement with "CF-R US"
when it is worn out.
!0
MASTER LEVEL VOLUME
Adjusts the signal level outputs from LINE OUT
@2
.
!1
MASTER BALANCE VOLUME
Adjusts the signal balance of the L to R side of the
outputs.
!2
MONITOR LEVEL VOLUME
Adjusts the headphone monitor level.
!3
CF MONITOR VOLUME
Crossfader signal to be monitored from each
program.
!4
MIC LEVEL VOLUME
Adjusts the input level of the MIC INPUT
@3
.
q
POWER INDICATOR
Lights up when the POWER SWITCH
!7
is on.
w
INPUT SELECTOR
Used to select the input (LINE or PHONO) to be
sent to each PGM channel. The upper most
position will select PHONO input. This selector
switch can also be used to perform for
TRANSFORMER SCRATCH.
e
TRIM VOLUME
Adjusts the input level of each channel. For
optional acoustic quality, set the INPUT LEVEL
VOLUME
u
to a position of 7 or 8 then; adjust the
TRIM so that a sufficient signal is fed through
the channel without distorting.
r
PGM ISOLATOR HI
Adjusts the HI frequency level of each PGM.
t
PGM ISOLATOR MID
Adjusts the MID frequency level of each PGM.
y
PGM ISOLATOR LOW
Adjusts the LOW frequency level of each PGM.
u
INPUT LEVEL VOLUME
Used to adjust the input level of each PGM
channel.