5
q
ISOLATOR [HI, MID-HI, MID-LO, LO]
Cuts and boosts each frequency range.
The level is flat when this knob is set at 12
o'clock.
w
BYPASS SWITCH
When set to the "OFF" mode(upward), a
full range signal is transmitted regardless of
the position of any controls.
e
FREQUENCY SHIFT SWITCH
Adjusts the frequency dividing point.
When this switch is moved to the right,
the frequency dividing point increases.
Moved to left, the dividing point decreases.
This switch controls the points between HI
and MID-HI, and MID-LO and LO.
○
4
INPUT SELECT SWITCH (PGM1
〜
5)
Used to select the input to be sent to each
PGM channel.
t
PEAK LED INDICATOR
Lights up when the signal is fed to the
channel. It turns on in green with nominal
signal, and it turns to red if the input
signal level is too high. If it lights in red,
please drcrease input gain using the gain
volume
（⑱）
.
y
INPUT LEVEL VOLUME (PGM1
〜
5)
Used to adjust the input level of each PGM
channel. Usually set at the 7-8 position
（
2
o'clock
）
.
■
ISOLATOR SECTION
■
INPUT SECTION
1
1
1
1
3
3
2
LEVEL
[dB]
FREQUENCY [Hz]
Frequency Shift Switch
HI
LOW
Frequency Shift Switch
HI
LOW
6
4
5
