7
REAR PANEL
■
REAR PANEL SECTION
26
21
20
16
23
22
24
27
25
17
18
19
⑯
PGM RTN 1/4" Phone Jack
Receives the signal from the external effect, EQ,
etc.. The internal signal route is disconnected
when a plug is connected to this jack.
⑰
PGM SEND 1/4" Phone Jack
Sends the input signal to the external effect, EQ,
etc..
⑱
PGM GAIN
Adjusts the input level of each PGM channel.
⑲
INPUT JACK - PHONO/LINE
PHONO: Connect turntables equipped with
MM (Moving Magnet Type)cartridge. The
signal from the turntable is fed to the PGM
channels when Phono input is selected.
LINE: Connect the equipment with line level
output (-10dB or 0dB). Such equipment
includes CD players, tape decks, DATs, MDs
etc. The signal from line level equipment is
fed to the PGM channels when Line Input is
selected.
⑳
GND TERMINAL
Connect this terminal to the ground lead of the
turntable.
@1
PA OUT [Balanced XLR MALE, 2:HOT/-10dB
〜
4dB]
The main output jack to connect to the power
amplifier.
@2
LINE OUT
［
1/4" PHONE /-14dB
〜
0dB
］
Sends the same signal as the PA OUT
@1
. Used
to connect to the secondary amplifie.
@3
PA OUT LEVEL
Used to adjust the signal level from -10dB
〜
+4dB
（
PA OUT
）
or -14dB
〜
0dB
（
LINE OUT
）
@4
SUB MASTER OUT
Mainly used to feed the signal to the DJ booth.
It also can be used as the substitute of the PA
out.
@5
REC OUT
Used to send the signal to the recording
device. The MASTER LEVEL VOLUME is
not applicable to the signal from this jack.
@6
POWER SWITCH
@7
AC POWER CORD
EFFECTOR
INPUT
MASTER
EFFECT RTN
EFFECT SEND
