Automatic mode Introduction
Push the selector switch to (A), all the way to the left until you hear
the “click”, in order to activate the automatic mode.
The automatic mode is now activated and the roller shutter will move
up and down at the programmed times. Regardless of the pro-
grammed times, it is still possible to move the roller shutter up and
down by pressing the up or down button and the programming
remains unaffected.
If you press the up or down button longer than 2 seconds, the roller
shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
·
press the down button, if the roller shutter is moving up,
·
press the up button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the up or
down button has been pressed.
By simply pushing the selector switch to manual mode (H), the auto-
matic mode can be interrupted for an extended period of time.
After selecting automatic mode again, the
Vestamatic
Rolltec Plus 500
roller shutter control will execute the last pending command from the
automatic mode. The last pending command will also be executed
when resetting after power failure.
- 37 -
G
Basic functions General
After the installation has been completed correctly (for instructions
please see pages 55 to 58), you can start programming.
Important: Please note that the
Vestamatic
Rolltec Plus 500
roller
shutter control cannot be programmed in case of power
failure.
Carefully pull to remove the cover cap and press the reset button with
a ball-point pen or something else suitable.
Pressing the reset button will activate the default times preprogrammed
by the manufacturer.
·
Current time –
0ß8:0ß0
·
Up time –
0ß6:0ß0
·
Down time –
2ß0:0ß0
On the following pages, you will find instructions how to customize
these times to your personal requirements.
- 38 -
G
83100711.qxd 21.06.01 06:00 Seite 39
