General Introduction
The delivery extent of the
Vestamatic
Rolltec Plus 500
roller shutter
control includes the following items:
1. Cover cap
2. Basic housing
3. Supporting frame basic housing
4. Combination frame one-fold – Jung “CD 500”, alpine-white
In case of power failure, the entire display starts flashing. Yet, the pre-
viously programmed times remain saved for several years.
The times or functions, you have previously programmed, can be
checked by performing a quick run. Press the time and day button
simultaneously for 3 seconds to activate the quick run. The time func-
tion will now run 60 times faster. Shortly tap the time and day button
simultaneously to stop the quick run.
- 35 -
G
Introduction Manual mode
The
Vestamatic
Rolltec Plus 500
roller shutter control features a
selector switch with which manual mode (H) or automatic mode (A)
can be selected.
Push the selector switch to (H), all the way to right until you hear the
“click”, in order to activate the manual mode.
All automatic functions are now disabled. Pressing the up or down
button will move the roller shutters up or down.
Simply press the opposite button to stop the motion, i.e.:
·
press the down button, if the roller shutter is moving up,
·
press the up button, if the roller shutter is moving down.
Accurate positioning of the roller shutter is guaranteed because the
roller shutter will only move up or down again after the up or down
button has been pressed.
- 36 -
G
83100711.qxd 21.06.01 06:00 Seite 37
