General Programming
After the installation has been completed correctly (for instructions
please see pages 34 to 37), you can start programming. All featured
functions are now ready to be operated.
Important: Please note that the
Vestamatic
Rolltec Pico
roller
shutter control cannot be programmed in case of power
failure.
Carefully pull to remove the cover cap and press the reset button with
a ball-point pen or something else suitable.
Pressing the reset button will activate default times pre-programmed
by the manufacturer. Also press the reset button, if you want to enter
completely new settings or delete the existing data for some other
reason.
Times pre-programmed by the manufacturer:
·
Current time –
0ß8:0ß0
·
Up time –
0ß6:0ß0
·
Down time –
2ß0:0ß0
On the following pages, you will find instructions how to customize
these times to your personal requirements.
- 27 -
G
Programming Summer/winter time
The display will indicate which time has been set.
The (S) in the upper left hand corner of the display stands for summer
time.
(0S9:0ß0)
The (W) in the upper right hand corner of the display stands for winter
time (manufacturer setting).
(0ß8:0W0)
If the present setting is incorrect and does not correspond with the
current time, you can simply update the time by pressing the summer/
winter button. The selected setting will appear in the display and the
time will be changed by one hour.
- 28 -
G
83100411.qxd 18.09.01 11:12 Seite 29
