Contents
Introduction
General
page 24
Manual mode
page 25
Automatic mode
page 26
Programming
General
page 27
Summer/winter time
page 28
Current time
page 29
Note
page 30
Up time
page 31
Down time
page 32
Random generator
page 33
Installation
Notes for professional electricians
page 34 – 35
Installation instructions / Technical data
page 36
Wiring diagram
page 37
Overview operating elements
Inside back cover
Wiring diagram
Back cover
- 23 -
G
G
Introduction General
The
Vestamatic
Rolltec Pico
roller shutter control is used for the
manual and automatic mode of electrically driven roller shutters. Its
numerous functions can be customised to your personal require-
ments.
The delivery extent of the
Vestamatic
Rolltec Pico
roller shutter control
includes the following items:
1. Cover cap
2. Basic housing
3. Supporting frame basic housing
4. Combination frame one-fold – Jung “CD 500”, alpine-white
In case of power failure, the previously programmed times remain
stored for 6 hours. During that time, the display does not indicate.
After the line voltage has been restored, the
Vestamatic
Rolltec Pico
roller shutter control automatically fast forwards to the current time. If
a power failure lasts 6 hours, the readjusting process can take up to
4 minutes. The roller shutter control is not ready for operation during
the readjusting process.
The last pending up or down command during power failures will be
executed after the current time is readjusted.
- 24 -
83100411.qxd 18.09.01 11:12 Seite 25
