Subject to modifications.
© Vestamatic GmbH
Art.-Nr.:
1253 001 GB 2218 A05 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
4/8
G
P R O · LL-ME-BAT/I-24/0,6 Nm RB IO-AIR
7. Settings / Functions of the motors
in radio operation IO-AIR
The motor can be controlled with multiple IO-AIR radio transmitters.
Subsequently, these are described depending on the radio transmitter type.
A maximum of 16 transmitters per motor can be programmed.
Description of radio remote control
IO-AIR Transmitter
A.
LED indication of selected channel of the
transmitter.
To change channel:
Briefly press one of the two channel selection
buttons
+
or . The LEDs show the current
selected channel. Use the button
+
or to
select the channel. The selection is saved im-
mediately.
PROG. button
at the back side
Fu Programming Transmitter
Radio Remote Control IO-AIR
B.
IO-AIR Transmitter 5C:
Switching from AUTO to MANUAL mode
(receiver-dependent).
Press and hold the button and then press
the
+
button for 5 seconds until the operat-
ing mode switches. The LEDs AUTO or MAN
and the channels will light up briefly.
IO-AIR Transmitter 10C:
Left LED indication channel 1–
5
Right LED indication channel 6
–10
C.
Manual control buttons.
Channel 1–10 = Motor / Shade / Lighting
Button ON/UP =
Q
Button STOP
Button OFF/DOWN =
q
B.
A.
C.
PROG. button
LED
Description of radio wall transmitter IO-AIR Switch
