manualshive.com logo in svg

Vestamatic 01580162, Operating Instructions Manual, Page: 13 / 15

Share
Download
Vestamatic 01580162 Operating Instructions Manual Download Page 13

Subject to modifications.

© Vestamatic GmbH

13/15

G

Art.-Nr.: 

3055 001 GB 

2619 A03

  •  Vestamatic GmbH  •  Dohrweg 27  •  D-41066 Mönchengladbach 

 •  www.vestamatic.com

VHA-Smart Controller

The use of Alexa an active internet connection is required.

To connect the VHA Smart Controller to a web-enabled network, either 

connect an Ethernet cable or connect the controller wirelessly, as de-

scribed above.

NOTE:

The device (e.g., smartphone) connected to the „Vestamatic AP“ 

network of the VHA Smart Controller may still remain connected 

and does not have to disconnect. If there is an internet connection, 

it will be forwarded.

i

Configure connection to Alexa

 

– Log in to the Alexa app with your Amazon account and install the 

 Vestamatic VHA Smart Controller Skill.
To do this, simply follow the steps in the Amazon app.

 

– After successfully adding the skill, give Alexa the following command:

“Alexa ... tell controller to initialize!”
Alexa will give you a feedback whether the initialization was successful.

 

– You will then receive an e-mail with an 8-digit code. Enter this code in 

the input field of the Vestamatic app.

 

– If the transmission was successful, you will receive a response in the app.

You can now control your devices with voice commands.
For an overview of possible voice commands, please refer to the skill 

description in the Alexa app.

NOTE:

The verification code will be sent to the e-mail address that is also 

used in the Amazon account.
If a wrong code is transmitted several times, the configuration will 

be blocked temporarily.

i

d) Alexa

Connecting to Alexa.

e) External

Create new account (only as admin)

Creates a new external account. This selection 

appears only for the admin use.

f)

Design

You can select between different color combina-

tions. The selection is updated immediately.

g) Date and Time

This setting can be used to specify the date and 

time. This is necessary for offline use. If the con-

troller is connected to the Internet, the time is 

 automatically  synchronized.

h) System

The system settings can be used to check for 

updates, reset the system, or shut down the con-

troller.

NOTE:

After Alexa has been configured, badges are displayed below the 

controllable elements (e.g. motors, groups, timers, etc.). These 

contain a numeric naming according to their type. See fig. 2.
Therefore the elements can be controlled by name and/or number.

i

Summary of Contents for 01580162
















Reviews:

No comments