Subject to modifications.
© Vestamatic GmbH
2/10
G
H O M E ∙ VL-SMI-230-45
Art.-Nr.:
8900 001 GB 3117 A04 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
2. Short description
Motor 45 mm tube diameter for roller shutters
Programmable upper and lower limit position
Limit positions can be virtual or physical (upper position)
Intermediate positions storage
Parallel connection allowed
Anti-block function
Simple setting of the limit position with the “VL-Progset-ME/SMI-230”
(Art.-no.: 54185775)
Re-synchronisation of physical limit positions
Cable 2.5 m white
4. Intended use
These types of tubular motor described in these manual is intended solely
for controlling roller shutters. These types of tubular motor cannot be used
in potentially explosive area.
These types of tubular motor are designed for using in a single sunshade
system.
3. Scope of delivery
Motor 45 mm tube diameter with 2.5 m connection cable
Operating instructions
Adapter set, comprising tube adapter / adapter ring
Mounting-kit, comprising safety clip / safety cotter
ATTENTION!
Pay attention to the following European
guidelines:
– The cables must conform to the applica-
ble VDE standard.
– If installing motors with a PVC H05VV-F
cable, the cable on surface-mounted out-
door installations and recessed-mounted
installations must be protected by a cable
conduit or cable duct.
– When installing the motor an all-pole dis-
connection with a contact gap of at least
3 mm per pole must be provided.
– The up and down directions of the
switch resp. button must be electrically
or mechanically locked against each
other. The change over time for changing
the running direction (up / down) must be
least 0.5 sec.
Ä
ATTENTION!
– Follow the safety instructions according
to EN 60335-2-97.
– Additional components for the implemen-
tation of the installation, such as adap-
tors and brackets must be chosen among
those offered by the producer. These
products are listed in the catalogue sup-
plied on request.
– When mounting the drive always use the
safest and most suitable tubular motor
and mounting bracket.
– For automatically actuated awnings a
minimum gap of 0.4 m to other parts in
the area must be maintained when the
awning is fully extended. By using as
an awning system the extended awning
must mainain a minimum height of 1.8 m.
Ä
IMPORTANT!
Any screws used to fix the rolling shutters
tube / awnings must in no way touch the
motor. Please refer to fig. 4.1 to 4.5.
Ä
WARNING!
Risk of injury due to improper installation
and commissioning.
Improper installation and commissioning may
lead to personal injury or property damage.
Therefore:
– When connecting the device, observe the
currently valid VDE standards (in particu-
lar DIN VDE 0100/0700), your local pow-
er company’s regulations and the current
accident prevention regulations.
– Connect the motor in accordance with the
wiring diagram.
– It is important for the safety of professional
electricians to follow the user instructions.
Please keep instructions for reference.
Ä
5. Technical data
Article
VL-SMI-230-45 / 10Nm
20Nm
30Nm
50Nm
Art.-no.: 01066291 01066301 01066311 01066321
Torque (nominal)
Nm
10
20
30
50
Output speed
rpm
15
15
15
12
Tractive power
kg
20
40
55
95
Supply voltage
VAC
230
230
230
230
Frequency
Hz
50
50
50
50
Rated power
W
126
165
227
227
Rated current
A
0,55
0,72
0,99
0,99
Running time
Min.
4
4
4
4
Protection degree
IP
44
44
44
44
Length L1
mm
461
481
522
551
