background image

 

2021.A 

 

11 

5.  Do  not  use  substances  for  cleaning  silver  and  be  careful  with  hydrochloric  or  sulphuric  vapors 

coming from floor washing products, for example. Do not aim water jets directly on the appliance, 

it might be damaged. After cleaning, rinse properly with clean water and dry carefully with a cloth. 

6.  The  appliances  are  made  in  a  way  that  little  maintenance  is  necessary.  Despite  this,  we 

recommend that the user subscribes to a maintenance agreement to have the appliance checked 

at least once a year by the specialized personnel of our assistance service or by a specialized 

technician. 

7. 

Before  carrying  out  any  maintenance  or  repair,  disconnect  the  appliance  from  the  gas 

network or cut off the mains. Use only original spare parts supplied by the manufacturer. 

8.  If  the  appliance  is  not  used  for  long  period  of  time,  please  clean  the  equipment  and  the 

surrounding areas properly. Pour a small quantity of cooking oil on the stainless steel surfaces. 

Carry out all maintenance operations. Cover all appliances with a suitable material and leave a 

few openings to allow air to circulate. 

Summary of Contents for FGC100















Reviews: