2021.A
10
Step 3: When the oven has cooled sufficiently ,turn the switch to COOK Mode for next cooking.
Caution
: Please follow upper steps to cool down the oven to avoid scald.
9. When finish cooking, turn the Cook Temperature Control to the lowest setting (fully
counterclockwise) and switch the Power Switch to OFF.
6. Electrical Diagram:
7. Cleaning & Maintenance
1. Before cleaning, switch off the unit and let it cool down.
2. Carefully clean daily the appliance to guarantee its proper operation and long life.
3. Steel surfaces must be cleaned with a dish washer
detergent diluted in very hot water by using a
soft cloth; for the toughest dirt, use ethylic alcohol, acetone or another non-halogenated solvent;
do not use abrasive powder detergents or corrosive substances such as hydrochloric acid,
muriatic or sulphuric acid. The use
of acids can affect the unit’s operation and safety. Do not use
brushes, steel cottons or abrasive disks made with other metals or alloys that might cause rust
stains due to contamination. For the same reason, avoid contact with iron objects. Do not use
steel cottons or stainless steel brushes because whilst they will not contaminate surfaces, they
can cause damaging scratches.
4. Metal powder, metal shavings from working and iron material in general, when in contact with
stainless steel surfaces, can cause rust stains. Superficial rust stain might be present on new
appliances and they can be removed with a detergent diluted in water and a Scotch Brite sponge.
If dirt is tough, do not use sandpaper or rough paper, but use synthetic sponges (for example
Scotchbrite sponges).
