background image

24 

LIMITED WARRANTY: 

VESSEL expressly warrants that for a period of one (1) year from the date of purchase, VESSEL static erasers 
will be free of defects in material (parts) and workmanship (labour). Within the warranty period, Defects occurring 
will be repaired or products will be replaced at VESSEL's option and expense, if VESSEL receives notice during 
the warranty period. Defective products must be returned to VESSEL Osaka Japan with proof of purchase date. 
And if your unit is out of warranty, VESSEL will quote repair charges necessary to ship your unit freight prepaid 
to where you have originally purchased. 

 
WARRANTY EXCLUSIONS: 

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, 
EXPRESSED AND IMPLIED, INCLUDING FITNESS AND MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. 
The express warranty will not apply to defects or damage due to accidents, neglect, misuse, alterations, operator 
error, or failure to properly maintain, clean, or repair products. 

 

LIMIT OF LIABILITY: 
This electronic static eraser use high voltage corona discharge and should not be used in or near 
flammable or explosive environments. In no event will VESSEL or any seller is responsible or liable for 
any injury, loss or damage, direct or consequential, whether based in tort or contract arising out of the use 
of or the inability to use the product. Fulfillment of VESSEL's warranty obligations will be Customer's 
exclusive remedy and VESSEL's and Seller's limit of liability for any breach of warranty or otherwise. 
Before using this unit, users shall determine the suitability of the product for their intended use, and users 
assume all risk and liability whatsoever in connection therewith. 
 

Model 

F120R-E 

 
 

Warranty 

(1) year from the date of purchase 

 

Customer 

Name 

 

Address 

 
 

Tel. No. 

 

Dealer 

Name/Address/Tel. No. 
 
 

 

 

17-25, Fukae-Kita 2-chome, 
Higashinari-ku, Osaka    537-0001 Japan 
Tel : +81 6 6976 7778    Fax : +81 6 6972 9441 
E-mail : [email protected] 
URL : www.vessel.jp 
 

Ver.3 Printed on 2019.10.15 

 

Summary of Contents for Stat Clean F-120R-E













Reviews: