Vessel F-6R, Instruction Manual

Page: 7 / 16

23

Installation
CAUTIONS
IN INSTALLATION
REMEMBER
Use only the included power supply adapter. Use of other adapters may
results in fire, electric shock and static electricity removal trouble.
REMEMBER Install F-6R securely. F-6R can be damaged or malfunctioned if it falls.
REMEMBER
Install F-6R based on below stated environment.
Adverse environments cause product deterioration and breakdown.
Humidity: 35~65%RH (No dewing or freezing) Temperature: 5~40
℃
PROHIBITED
Do not use F-6R based on below stated environments.
Adverse environments can result in explosion, fire, electric shock and
accident.
*Where explosion-proofing is required.
*Where flammable atmospheres found.
*Where temperature and humidity are outside specified ranges.
*Where dewing or sharp temperature fluctuations occurs.
*Where there is heavy dust or smoke.
*Where possibly wet by water, oil, chemicals, etc.
*Where strong electric or magnetic fields are generated.
1. To be installed on desktop (F-6RST-E)
Do not place the unit on an unstable surface. It may cause breakage if the unit falls.
2. To be mounted to walls or structures (F-6RST-E)
The installation height should be determined with its effective
ionizing area in mind.
The unit can be mounted onto structures / cell-production
benches by the 5 screw holes (φ6.5mm) on the bottom.
Also, the unit angle becomes adjustable by loosening the Trass
screws on its sides. Fasten the screws securely after
adjustment.
Make sure there is no obstacle between the unit and the work
material.
Make sure the strength of the structure to which the unit is
mounted.
When installing the unit, make sure not to block the air intake
area.
At least 10cm distance shall be kept between the air intake
area and the wall.
5-
Φ
6.5
Trass screw (M5)
Rubber washer
60