Vessel F-6R, Instruction Manual

Page: 8 / 16

24

Installation
3. To be installed by the clip (F-6RCL-E)
The attached clip is for temporary installation.
Vibration and other factors may change the direction of the fan
blow or cause the unit to fall. The clip cannot be used for
objects whose thickness is more than 40mm.
4. To be installed to machinery (F-6RCL-E/F-6RST-E)
If the clip / stand are detached, there are screw holes (M5 x P0.8)
on the three surfaces. Please refer to the diagram at the right.
The unit must be securely mounted by a jig or other means.
※
The length of M5 screws should be up to 6 mm from the surface
of the unit.

Before Use
CAUTIONS
IN BEFORE USE
REMEMBER
Use only the included power supply adapter. Use of other adapters
may results in fire, electric shock and static electricity removal trouble.
REMEMBER If noticing anything strange, stop using F-6R immediately.
PROHIBITED Do not use F-6R other than static electricity removal.
PROHIBITED
Do not remodel or disassemble F-6R. F-6R contains high voltage
parts.
PROHIBITED Do not drop F-6R or apply strong impacts.
PROHIBITED Keep F-6R away from sources of heat.
PROHIBITED
Do not test the electrode wires for grounding, short-circuiting or
sparking.
These tests can adversely affect ion balance.