29
CONTROLLER LEDS
When boot-up is finished and the Vess R2600 subsystem is functioning normally, the Controller
status LED displays green continuously; the Management port LEDs display green or flash
depending on your network connection; the FC, iSCSI, and SAS Expansion LEDs display green or
flash during port activity.
LED
Description
(refer to product manual for more details)
SAS Expansion
Lights green when connected, flashes green when active.
Controller Status
Green light indicates controller is operational.
Dirty Cache
Lights amber if cache is dirty, otherwise dark.
USB
Green light indicates a connection, dark when not connected.
iSCSI (2 above
each port)
Left LED lights green when connected, flashes green when active, dark if
not connected. Right LED indicates connection speed, green is 100 Mbps,
amber is 1000 Mbps.
FC ports
See product manual.
Figure 30: Vess R2600fi controller LEDs
DISK DRIVE LEDS
There are two LEDs on each Drive Carrier. They report the presence of a disk drive, activity of the
drive, and the drive’s current condition.
Figure 31: Vess R2600 drive carrier LEDs
If there is a disk drive in the carrier, the Power/Activity LED displays Blue. If not, the Power/Activity
LED remains dark. The Power/Activity LED flashes Blue during drive activity.
The Disk Status LED displays Green when a drive is configured.
SAS
Expansion
LED
Dirty
Cache
Controller
Status
USB
LED
iSCSI port LEDs
FC Port LEDs
Drive Status
Power/Activity
