manualshive.com logo in svg

VESPA SPIRIT 150 3V ABS, Owner'S Manual

Share
Download
VESPA SPIRIT 150 3V ABS Owner'S Manual Download Page 48

03_04

Warning light (insufficient oil pressure) (03_04)

The vehicle is equipped with a warning light that comes on when the key is turned to
«

ON

». However, this light should switch off once the engine has been started. 

If the

light comes on while braking, at idle speed or while turning a corner, it is nec-
essary to check the oil level and top it up if required. If after having topped-up
the oil, the warning light still comes on while braking, at idle speed or while
turning a corner, it will be necessary to take your vehicle to an Authorised Serv-
ice Centre.

Engine oil change

To change the engine oil and the oil filter, as indicated in the scheduled maintenance
table, contact an 

Authorised Service Centre

.

CAUTION

RUNNING THE ENGINE WITH INSUFFICIENT LUBRICATION OR WITH INADE-
QUATE LUBRICANTS ACCELERATES THE WEAR AND TEAR OF THE MOVING
PARTS AND CAN CAUSE IRRETRIEVABLE DAMAGE.

TOPPING UP THE ENGINE WITH AN EXCESSIVE AMOUNT OF OIL MAY CAUSE
MALFUNCTION AND/OR A DROP IN PERFORMANCE OF THE VEHICLE.

USING OILS OTHER THAN THOSE RECOMMENDED CAN SHORTEN THE LIFE
OF THE ENGINE.

CAUTION

USED OILS CONTAIN SUBSTANCES HARMFUL TO THE ENVIRONMENT. FOR
OIL CHANGE, CONTACT AN AUTHORISED SERVICE CENTRE WHICH IS EQUIP-

48

3 Maintenance

Summary of Contents for SPIRIT 150 3V ABS







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands