manualshive.com logo in svg

VESPA SPIRIT 150 3V ABS, Owner'S Manual

Share
Download
VESPA SPIRIT 150 3V ABS Owner'S Manual Download Page 102

The descriptions and images in this publication are given for illustrative purposes only and are not binding. While the basic characteristics as described and illustrated in this booklet remain unchanged,

Piaggio & C. S.p.A. reserves the right, at any time and without being required to update this publication beforehand, to make any changes to components, parts or accessories, which it considers

necessary to improve the product or which are required for manufacturing or construction reasons.

Not all versions/models shown in this publication are available in all countries. The availability of each model should be checked at the official PIAGGIO sales network.

© Copyright 2015 - Piaggio & C. S.p.A. All rights reserved. Reproduction of this publication in whole or in part is prohibited.

Piaggio & C. S.p.A. Viale Rinaldo Piaggio, 25 - 56025 PONTEDERA (PI), Italy

www.piaggio.com

Summary of Contents for SPIRIT 150 3V ABS







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands