03_25
03_26
03_27
Front light group (03_25, 03_26, 03_27, 03_28)
To access the headlight bulbs, remove the front of the handlebar cover, as follows:
1.
Remove the rear-view mirrors.
2.
Unscrew the 3 screws holding the handlebar cover. The front central screw «
B
»
and the 2 rear screws «
A
». Once this is done, the handlebar cover can be removed.
To replace the high-/low-beam headlight bulb:
1.
Disconnect the power contacts and remove the rubber protection «
C
».
2.
Remove the retaining clip «
D
» and slide off the bulb.
To replace the tail light bulb:
1.
Slide off the rubber bulb holder «
E
» from its fitting.
2.
Hold and slide off the bulb.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.
52
3 Maintenance
Summary of Contents for S 150 2008
