VESPA S 125, Manual

Page: 46 / 80

Quantity : 5
Instrument panel light bulbs Type : All glass
Power : 12V - 2W
Quantity : 3
License plate light bulb Type: ALL GLASS
Power: 12V - 5W
Quantity: 1
03_25
03_26
Front light group (03_25, 03_26, 03_27, 03_28)
To access the headlight bulbs, remove the front of the handlebar cover, as follows:
1. Remove the rear-view mirrors.
2. Unscrew the 3 screws holding the handlebar cover. The front central screw « B »
and the 2 rear screws « A ». Once this is done, the handlebar cover can be removed.
To replace the high-/low-beam headlight bulb :
1. Disconnect the power contacts and remove the rubber protection « C ».
2. Remove the retaining clip « D » and slide off the bulb.
To replace the tail light bulb:
1. Slide off the rubber bulb holder « E » from its fitting.
2. Hold and slide off the bulb.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS RELATED TO THE HUMIDITY AND/OR
TO LOW TEMPERATURES.
46
3 Maintenance