VESPA PX 125 150 euro 2, Workshop Manual

Page: 92 / 142

Replace the seat and glove-box cylinders. To re-
place these follow the operations described for the
removal of the cylinder when the ignition key-
switch is in the «LOCK» position. If the locks have
been left open however, extract the cylinder by
pushing lip «F» shown in the figure after having
carefully cleaned the housing. Then insert the new
cylinder. Bear in mind that for the replacement of
the cylinder on the seat lock, it is necessary to re-
move the lock assembly, acting upon the three
screws.
Removing the ignition key-switch when on *lock*
Should it be necessary to replace the steering lock
cylinder when the keys have gone missing, pro-
ceed as follows:
Cylinder removal: in the event that the key-switch
is in the «LOCK» position, it is necessary to pro-
ceed by drilling the cylinder with the aid of a Ø8
mm at least 30 mm long: this allows to release (or
destroy) the internal retaining device of the drilled
cylinder. Hence extract the body and any residues
so to be able to use the body for refitting.
Taillight assy.
−
Remove the 2 fixings shown in the figure and
replace the blown bulbs.
−
Replace, if necessary, the taillight lens.
−
To replace the taillight assy., remove the lens,
detach the wiring and remove the 2 fasteners from
underneath the frame.
Chassis
Vespa PX 125 150 Euro 2
CHAS - 92