manualshive.com logo in svg

VESPA PX 125 150 euro 2, Workshop Manual, Page: 77 / 142

Share
Download
VESPA PX 125 150 euro 2 Workshop Manual Download Page 77

NADELLA are simultaneously ejected in the direc-

tion opposite the tool thrusting force.

After removing the pin and the first NADELLA, the

swinging hub gets detached from the steering

tube.

To remove the second NADELLA, use the tool fit-

ted with part 2 instead of part 1, on the side oppo-

site the one shown in the figure.

N.B.

DURING THE REMOVAL OPERATIONS DESCRIBED
ABOVE, THE ROLLER BUSHINGS ARE DESTROYED
WHEN THE EXTRACTOR IS USED. UPON REFITTING, IT IS
THEREFORE NECESSARY TO USE NEW BUSHINGS AS
WELL AS A NEW PIN, NEW SEALING RINGS AND DUST
GUARDS.

Specific tooling

020021Y

 

Front suspension service tool

Connect the swinging hub to the steering tube with

the guiding pin.

- Use the tool fitted with part 3 on the stem and part

4 .

Lubricate the pin with recommended grease and

insert it temporarily on the swinging hub, move the

tool handgrip until part 3 is fully inserted on the

steering tube.

After fitting the pin, insert the two spacers, slightly

hitting them with the mallet.

N.B.

BEFORE PROCEEDING WITH THE DESCRIBED FITTING,
PLACE THE TWO DUST GUARD RINGS ON THE SWING-
ING HUB AS SHOWN IN THE FIGURE.

Specific tooling

020021Y

 

Front suspension service tool

Recommended products

AGIP GREASE SM 2

 

Grease for odometer

transmission gear case

Lithium grease with NLGI 2 molybdenum disul-

phide; ISO-L-XBCHB2, DIN KF2K-20

Vespa PX 125 150 Euro 2

Suspensions

SUSP - 77

Summary of Contents for PX 125 150 euro 2















































































































































Reviews:

No comments