VESPA LXV 125, Service Station Manual

Page: 67 / 226

Fuses
L'impianto elettrico è protetto da due fusibili da
15A « B » collocati accanto alla batteria e da due
fusibili da 7,5A « A » collocati sotto la calandra an-
teriore. Per rimuovere la calandra anteriore è nec-
essario togliere, con l'ausilio di un cacciavite, la
placchetta con il logo Piaggio posto sullo scudo
anteriore quindi rimuovere la vite sottostante
CAUTION
IN ORDER TO AVOID DAMAGING THE ELECTRICAL SYS-
TEM, NEVER DISCONNECT THE WIRING WHILE THE EN-
GINE IS RUNNING. DO NOT TIP THE SCOOTER TOO MUCH
IN ORDER TO AVOID DANGEROUS LEAKAGE OF BAT-
TERY ELECTROLYTE
.
CAUTION
MODIFICATIONS OR REPAIRS TO THE ELECTRICAL SYS-
TEM, PERFORMED INCORRECTLY OR WITHOUT STRICT
ATTENTION TO THE TECHNICAL SPECIFICATIONS OF
THE SYSTEM, CAN CAUSE ERRORS IN FUNCTIONING
AND RISK OF FIRE.
CAUTION
BEFORE REPLACING A BLOWN FUSE, FIND AND SOLVE
THE FAILURE THAT CAUSED IT TO BLOW. NEVER TRY
TO REPLACE THE FUSE WITH ANY OTHER MATERIAL
(E.G., A PIECE OF ELECTRIC WIRE).
B
ULBS
Specification Desc./Quantity
1 High/low beam light bulb Type : Halogen (H4)
Power : 12V - 55/60W
Quantity : 1
2 Front tail light bulb Type: All glass
Power: 12V 5W
Quantity: 1
3 Front turn indicator bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
4 Rear turn indicator light bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
5 Stop and tail light bulb Type : Spherical
Power : 12V 21/5W
Quantity : 1
6 12V - 2W warning light bulbs Type : All glass
Function : Turn indicators, engine oil, fuel reserve, high-
beam light
Quantity :4
LXV 125
Electrical system
ELE SYS - 67