manualshive.com logo in svg

VESPA LXV 125 3V ie 2013, Manual

Share
Download
VESPA LXV 125 3V ie 2013 Manual Download Page 92

The descriptions and images in this publication are given for illustrative purposes only and are not binding. While the basic specifications as described and illustrated in this manual remain unchanged,
Piaggio Vi

ệ

t Nam reserves the right, at any time and without being required, to update this publication beforehand, to make any changes to components, parts or accessories, which it considers necessary

to improve the product or which are required for manufacturing or construction reasons.

Not all versions/models shown in this publication are available in all countries. The availability of each model should be checked at the official Piaggio sales network.

"© Copyright 2013 - PIAGGIO VI

Ệ

T NAM. All rights reserved. Reproduction of this publication in whole or in part is prohibited."

PIAGGIO VI

Ệ

T NAM- After Sales

LOT M - BINH XUYEN INDUSTRIAL ZONE - VINCH PHUC - VIET NAM

CUSTOMER SERVICE CENTRE

Please contact with us following:

Hot line: 

1800 5555 85

Email:

[email protected]

Website:

www.piaggio.com.vn

Summary of Contents for LXV 125 3V ie 2013





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands