
WARNING
THE LOSS OF THE BROWN KEY PREVENTS LATER REPAIRS TO THE "PIAG-
GIO IMMOBILIZER" SYSTEM AND TO THE ENGINE CONTROL UNIT.
01_12
Immobilizer device enabled indicator led (01_12)
Activation of the «
PIAGGIO IMMOBILIZER
» system is signalled by a flashing warning
light «
I
» (see the "Analogue instrument panel" section).
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will be provided by an
Author-
ised Piaggio-Gilera Service Centre
with information on the type of fault detected.
Operation
Every time the ignition key is removed in the "
OFF
" or "
LOCK
" position, the safety
system activates the immobilizer system. Turning the key to "
ON
" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "
OFF
" and then to "
ON
"; if the lock
cannot be disabled, try with the other key supplied (brown). If the engine cannot be
started, contact an
Authorised Piaggio Service Centre
, which is provided with the
electronic equipment required to detect and repair the system. The Immobilizer is also
activated by switching off the engine with the
RUN OFF
switch. This happens even if
the starter key is in «
ON
».
When additional keys are required, please note that data storage (up to 3 keys max.)
must be done on all keys, both new ones and existing ones. Take the key with the
brown grip and all the blue keys supplied to an
Authorised Piaggio Service Cen-
16
1 Vehicle
Summary of Contents for LXV 125 3V ie 2013
