VESPA LX 125 i.e. Manual Download | Manualshive

Page: 48 / 104

background image

works perfectly. Failure to obey this warning can lead to a run away with serious in-
juries or even death.

CAUTION

IN CASE OF EMERGENCY ALWAYS USE THE ENGINE STOP SWITCH LOCATED
ON THE RIGHT HAND SIDE OF THE HANDLEBAR. DO NOT RIDE THE MOTOR-
SCOOTER IF THE THROTTLE DOES NOT AUTOMATICALLY RETURN TO IDLE
IN ORDER TO AVOID SERIOUS ACCIDENT WITH SEBSEQUENTLY INJURY OR
EVEN DEATH. CONTACT YOUR AUTHORIZED PIAGGIO SERVICE CENTER
WHO WILL PROVIDE FOR THE NECESSARY REPAIRS.

03_17

It is very important to your safety that you give full attention to the riding task. Watch
what you are doing, do not allow yourself to be distracted by other cars, people or
things on the roadside, etc. Never smoke, eat, drink, read, etc. while riding your mo-
torscooter. If you must consult a map, pull over when it can be done safely.
Use only your motorscooterâs specific fuels and lubricants indicated in the RECOM-
MENDED PRODUCTS; check the oil, fuel and coolant levels regularly.

If you and your motorscooter are involved in an accident, ensure that there has been
no damage to the control levers, tubes, wires, braking system and other vital parts. If
your motorscooter is involved in an accident, take it immediately to your Authorized
Piaggio; Service Center who has the equipment and knowledge to check for damage
which may compromise your safety. Your Piaggio Dealer is qualified to help you with
any safety problems that you might have, but of course it is necessary for you to report
any malfunctions to your mechanic in order for him to help you. Do not use your mo-
torscooter if it is damaged. A damaged motorscooter may become unstable or present
other problems which can increase the risk of accident, and therefore serious injury
or even death.

Do not attempt to modify the position, angle or color of your license plate. Do not cover
it with even a clear plastic covering. Do not modify any of the safety equipment of your
motorscooter, especially such safety related items as directional indicators, rear view
mirrors, lights or horn. Any modification to your motorscooter will invalidate the war-
ranty. Do not modify your engine in an attempt to increase the horsepower. This can

48

3 Use

«
...
46
47
48
49
50
...
»

Summary of Contents for LX 125 i.e.









































































































Reviews:

No comments

Related manuals for LX 125 i.e.

Brand: Rascal Pages: 28

Ruckus NPS50 2018

Brand: Honda Pages: 115

Brand: YUME Pages: 10

Brand: Myria Pages: 52

Brand: HERO Pages: 81

Brand: Enerwatt Pages: 20

Brand: Lemeego Pages: 2

Brand: Kinroad Pages: 34

Brand: SEEMARK Pages: 12

Brand: Shoprider Pages: 20

Brand: hugo Pages: 32

2x2 Dual-Use 2018

Brand: UBCO Pages: 57

Brand: Shoprider Pages: 20

Brand: TN’G Pages: 35

Brand: Kruze Pages: 9

Brand: Stone Mountain Pages: 16

Disney JUNIOR MICKEY AND THE ROADSTER RACERS KT1490WM

Brand: PACIFIC CYCLE Pages: 7

Brand: Hudora Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands