ORIGINAL INSTRUCTIONS
13
Heatline - Duct mounted Heater with controls
Installation, Operation and Maintenance Manual
VES Andover Ltd. Eagle Close, Chandlers Ford Ind. Est, Eastleigh, Hampshire, SO53 4NF
Tel: 08448 15 60 60 Fax: 02380 26 12 04 E-mail: [email protected] Web: www.ves.co.uk
Controls
9.1 CP Option Operation
Layout
Button Operation
When the thermostat is in normal operation, the actual operating mode and status
are indicated by symbols.
When a button is pressed, the RDG goes into mode selection.
The LCD backlight will turn on, all possible mode selection options (symbols) will
turn on, indicator element (arrow) will appear on the current mode/status.
When the button is pressed again, the indicator element will change to the next
mode symbol and so on.
After the last press and a time-out of 3 seconds, the newly selected mode is
confirmed, the other elements disappear.
After a time-out of 20 seconds, the LCD backlight will turn off.
1 Operating mode button / Esc
2 Button to enter the time and to set the timers
3 Fan mode button / OK
\ Q" ? % ~%
9
