ORIGINAL INSTRUCTIONS
21
Heatline - Duct mounted Heater with controls
Installation, Operation and Maintenance Manual
VES Andover Ltd. Eagle Close, Chandlers Ford Ind. Est, Eastleigh, Hampshire, SO53 4NF
Tel: 08448 15 60 60 Fax: 02380 26 12 04 E-mail: [email protected] Web: www.ves.co.uk
9.8 Control parameters
Continued
9.8.1 Parameter
setting
1 Operating mode button / Esc
2 Button to enter the time and to set the timers
3 Fan mode button / OK
\ Q" ? % ~%
1. Press left and right button simultaneously for >3 seconds, release, then press the
right button for >3 seconds. The display shows “P01”. Continue with step 2.
Expert level
Y~
parameters
(both levels)
Resetting
parameters
Service level
Caution
The factory setting for the control parameters can be reloaded via parameter P71, by
changing the value to “ON”. Confirm by pressing the right button.
The display shows “8888” during reloading.
2. Select the required parameter by turning the rotary knob.
3. Press button 3 (OK); the current value of the selected parameter starts blinking and can
be changed by turning the rotary knob.
\ # ^ ; % ~ =
| ' " < ~ % `\
6. Press button 1 (Esc) to leave the parameter setting mode.
1. Press left button and right button simultaneously for >3 seconds, release, press
the left button for >3 seconds, then turn the rotary knobcounterclockwise min. ½
rotation. The display shows “Pxx”.
Continue with step 2.
Controls
9
Continued
