Accessories
Battery charger
The wall charger supplied with your phone should be suitable for your region. However, you should
always check that the electrical rating of the AC outlet is appropriate for the charger before you attempt to
plug it in.
The battery for your Signature Touch requires charging at regular intervals. The battery does not have to
be completely discharged before you can charge it.
For information on how to charge your phone, see "Charge the phone" on page 12.
Only applicable for safe use in regions at an altitude below 2000 m.
Other charging options
You can also charge the battery by using:
l
A compatible PC (this method also provides data connectivity)
l
The VERTU Wireless charger or a wireless charger that conforms to the Qi standard.
Data cable
The USB data cable enables you to transfer data between your Signature Touch phone and a compatible
computer.
Note: Two microUSB cables, 1200 mm (CA-225DV), are supplied.
1.
Connect the USB data cable to the microUSB connector of your Signature Touch. Make sure the
cable is inserted correctly, with the USB symbol facing up.
2.
Connect the cable to a USB port of the computer. The phone starts charging, and a number of
USB connection modes are available. Drag the status and notification bar down to select from the
following options:
Media device (MTP) — to transfer media files between your phone and a PC.
Accessories
© 2014 Vertu Corporation Limited. All rights reserved.
64
