Chapter 3 Web Interface of RDU501
85
RDU501 Intelligent Monitoring Unit User Manual
3) Set the communication parameters of the short message MODEM;
4) Click the
Save
button to save the current user's SMS module configuration.
RDU multimedia voice notification system settings
1) Enter the server IP address at the
Server IP
address;
2) Enter the port number in the
Port number
field, the default is 13393;
3) Click the
Save
button to save the multimedia voice notification system configuration.
Mail server configuration
1) Enter the server IP address or domain name in the
Mail server field
;
2) Enter the
port number, mail user name, email password
and
outbox address
in the corresponding fields;
3) Click the
Save
button to save the current user's mail server configuration.
Note
1.
The port number defaults to 25. When you select
Enable SSL
, the port number automatically changes to 465. When TLS is
enabled, the port number automatically changes to 587.
2.
When using SSL/TLS, make sure the mail server supports SSL/TLS function.
3.
The mail encoding format defaults to HTML format, and you can select plain text format.
Alarm email information configuration
1) Enter the email address of the service center in the
Contact information field
;
2) Enter the phone number of the service center in the
Service phone
field.
3) Click the
Save
button to save the modified alarm email information configuration.
2. SMS balance inquiry
Click the
Email SMS Configuration
submenu under the
Configuration Management
menu, and then click the
SMS
Balance Inquiry
tab to pop up the page shown in Figure 3-127.
Figure 3-127 SMS balance inquiry
The SMS balance query provides periodic query and manual query. According to Figure 3-127, fill in the carrier
number, service code and query period. Click the
Save and Query
button to complete the configuration saving and
send the query SMS. The system receives the balance SMS sent by the carrier and saves it to the database and
forwards it to the admin user's mobile phone. You can view the balance SMS on the web page by manually clicking
the
Refresh query record
button.
