Vertiv Liebert RX, User Manual

Page: 7 / 34

Vertiv | Liebert
®
RX
™
Remote Distribution Cabinet User Manual | 3
1.0 INSTALLATION
1.1 Unpacking and Preliminary Inspection
A top-quality installation begins on the receiving dock.
• Inspect the shipment for damage or signs of mishandling before unpacking the unit(s).
• Check Shock-Watch
™
indicator.
• Uncrate the unit carefully. Use care to avoid puncturing the container with sharp objects that would
damage the contents.
• Remove the packing and vapor barriers and inspect the equipment for any obvious shipping damage.
1.2 Handling Considerations
The Liebert RX is bolted to a wooden pallet to allow handling by a forklift, pallet jack or similar
equipment.
Check size and weight —Refer to the cabinet drawings furnished with the unit for size and
weight information. Typical cabinet dimensions and weights are shown in Figure 1 .
Plan the route —The route that the unit will follow to its installation area should be planned to
ensure that all passages are large enough to accommodate the unit and that the floors are strong
enough to support the weight. Check all doorways, hallways elevators, ramps and other portions
of the route to determine if there are any obstructions and to ensure each is large enough and
strong enough to allow easy passage.
Move with care —The Liebert RX should be moved to the installation area on the wooden pallet
using forklift or pallet jack.
If any damage is observed —Immediately file a damage claim with the shipping agency and
forward a copy to:
Vertiv
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229 USA
NOTE
Read this entire manual before installing and operating the system. Upon receipt of a Liebert RX,
the installer should perform the following steps to ensure a top-quality installation.
WARNING
Risk of heavy unit falling over. Improper handling can cause equipment damage, injury or
death.
The unit should NOT be loosened from the shipping pallet until after all handling by forklift
or pallet jack is completed. Exercise extreme care when handling Liebert RX cabinets to
avoid equipment damage or injury to personnel.