Vertiv Liebert IntelliSlot WEBRT3N, User Manual

Page: 20 / 28

SSL Information
Allows user to upload an SSL certificate. When both the public key and the SSL certificate are uploaded,
the communication will be encrypted by SSL. When finished with the configuration, click
Apply to reboot
the card.
NOTE: To communicate via HTTPS, ensure the https port is set to 443.
RADIUS Server
Allows the user to input RADIUS server parameters.
Enable RADIUS in Web/Telnet Login—
Select Yes to enable RADIUS.
RADIUS Server Address—
Enter the IP address of the RADIUS server.
Authentication Port—
The RADIUS port number. Default is 812.
Shared Key—
Enter the shared key between the RADIUS server and the client.
Connection Timeout—
Set the number of seconds to suspend the login time after the RADIUS server is
rejected.
Connection Retry—
Sets the number of connections to the RADIUS server again.
4.3.8 System Time
This page is used to set the IS-WEBRT3N card system time. The IS-WEBRT3N card can be designated to
have as many as two time servers; a time zone may also be entered.
Time Between Automatic Updates
—sets an interval for time synchronization.
Primary Time Server / Secondary Time Server
—sets a Primary Time Server and a Secondary Time Server
for the IS-WEBRT3N card.
Time Zone (Relative to GMT)
—sets a different time zone for different countries.
Using Daylight Saving Time—
Select whether to use the daylight saving time system to adjust the clock
for Daylight Savings Time.
System Time (mm/dd/yyyy hh:mm:ss)
—sets the IS-WEBRT3N card system time manually. Set this in the
format: mm/dd/yyyy hh:mm:ss
Auto Restart System for Every (0 is disabled)—
The card restarts the system automatically at the preset
hour or minute.
Manual Restart System After 30 Seconds—
One you click Apply, the card restarts after 30 seconds.
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual | 20