Vertiv Liebert IntelliSlot WEBRT3N, User Manual

Page: 16 / 28

Ethernet
Connection Type
—sets the communication speed between IS-WEBRT3N card and Network. The IS-
WEBRT3N card will reboot after Connection Type is changed.
Supports MODBUS TCP. Dynamic DNS and PPPoE are supported.
NOTE: Clicking Apply will reboot the IS-WEBRT3N card.
Dynamic DNS
Dynamic DNS is a service that allows you to alias a dynamic P address to a static hostname. Ensure the
account/password has been registered from the DNS service provider.
Service Provider:
Dynamic DNS providers can be selected from this list.
Domain Name:
The domain name you have created from the DDNS provider you selected above.
Login Name:
The login/account name you created with the selected DDNS provider.
Login Password:
The password you have assigned to your DDNS account.
Use external STUN server to get Public IP to register:
Select Yes to ensure the NetAgent uses the
WAN/Public IP to update the selected DDNS server.
To use iCV99.net as the service provider:
1. Ensure the NetAgent is connected to the internet.
2. From the Service Provider drop-down menu, select
icv99.net. The Domain Name and Login
Name fields will automatically populate with the serial number of the device.
3. Enter the NetAgent password, which can be found on the NetAgent label, then click Apply .
PPPoE
From this page, you can connect NetAgent directly to the internet with PPPoe using your xDSL modem.
Enter the login name and password to enable the connection. Once set up, The IS-WEBRT3N card will
connect directly to the internet.
NOTE: Any abnormal connection failure will cause a re-dial.
4.3.4 SNMP
This page is to set
IS-WEBRT3N card
SNMP settings so it can be used by an NMS ( Network
Management System).
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual | 16