9
05: Bypass enable/disable when UPS is off
Interface
Setting
Parameter 2:
Enable or disable Bypass function. You may
choose the following two options:
ENA:
Bypass enable
DIS:
Bypass disable (Default)
6: Autonomy limitation setting
Interface
Setting
Parameter 2:
Set up backup time on battery mode for
general outlets.
0-999:
setting the backup time in minutes from 0-999 in
battery mode.
0:
When setting as “0”, the backup time will be only 10
seconds.
999:
When setting as “999”, the backup time setting will be
disabled.
07: Battery total AH setting
Interface
Setting
Set up the battery total AH of the UPS. (unit: AH)
7-999: setting the battery total capacity from 7-999 in AH.
Please set the correct battery total capacity if external
battery bank is connected.
If unit is standard model, the AH is fixed to 9AH.
If the unit is long-run model, the default setting is 65AH.
00: Exit setting
Interface
Setting
ESC:
Exit the setting menu.
