2.
Remove the side wooden panels. And then remove the top wooden panel and the cushioning from the top of the
unit.
3.
Remove the stretch wrap that attach the ramp to the unit. Remove the ramp and set it aside until needed for
moving the unit. Remove the bag around the unit.
Figure 3.5 Unpacking the Unit
3.7 Removing the Unit from the Pallet
WARNING! Risk of unsecured unit rolling off pallet. Ensure that the unit and pallet are located on a flat
surface before loosening the hardware securing the unit to the pallet.
WARNING! Two or more properly trained and qualified personnel are required to move the unit to its
installation location.
To remove the unit from the pallet:
1.
Remove the left and right shipping brackets from pallet by removing three M8 hex screws from each bracket.
2.
Remove the front and rear shipping brackets from the pallet by removing two M6 hex screws and two M8 hex
screws for each bracket.
3 Pre-installation Preparation
15
Vertiv™ Liebert® CRV CRD25 and CRD35 Row-Based Cooling System User Manual
