Appendix B: Remote Port Pin-out
The REMOTE port uses a 6p6c socket. The pin-out is listed below.
NOTE: Pins 2 and 3 are inactive. However, they are still connected internally. No links should be made to these pins.
Pin
Signal
1
Sense/5V
2
Not used (do not use)
3
Not used (do not use)
4
GND
5
RX
6
TX
Table A.1 Remote Port Pin-out
NOTE: The transmitter detects the presence of an incoming power signal to determine whether 5V should be supplied
at the receiver.
Appendices
13
Vertiv™ Avocent® LongView™ 5500/5520 High Performance KVM Extender System Installer/User Guide
