590-2112-501A/SL-29427/4200-117
3-4
Revision 3
3.3
Connecting the ELS Sensor Module
The following table describes where the connections go on the ELS sensor module.
Figure 6 - ELS Sensor Module Connectors
“In” jack
The RJ11
“
In
” jack
on the first ELS sensor module connects the
cross-over 4 pin phone cable from the ELSi interface module
“Out” jack.
“Out”
jack
The RJ11
“
Out
” jack connects the
cross-over 4 pin phone cable
from the first ELS sensor m
odule to the “In” jack on the
second
ELS sensor module. This is the same for each additional ELS
sensor module on the battery string.
For example, The “Out” jack
on the second ELS sensor module goes to the
“In” jack on the
third ELS sensor module. The RJ11
“
In
” jack
connects the cross-
over 4 pin phone cable from the ELSi interface module to the
“Out” jack on the
last ELS sensor module for a continuous loop.
The following diagram illustrates how the ELSi interface module and ELS sensor modules are connected
on a string of batteries.
Figure 7 - ELSi Interface and ELS Sensor Module Connections
