NetSure
™
RDB Series
Installation and User Manual, Section 6041
Spec. No: 547692, 547693, 547499, 547694, 547695, 547615,
Document Code: Section 6041
547696, 547697, 547503, 547500, 547698, 547699, 547501
Revision K, April 28, 2017
[iii]
Important Safety Instructions
Save These Instructions
WARNING!
Please read and follow all safety
information! Failure to observe the safety information
listed below may result in electric shock, fire hazards, or
serious injury. Please safeguard this Installation and
User Manual.
Intended Use
The NetSure™ RDB Rack PDU (Power Distribution Unit) is designed
to deliver power to information technology and
telecommunication equipment.
Operate the Rack PDU in an indoor environment only within an
ambient temperature range and a relative humidity range as listed
in “Environmental Characteristics” on page 5. Install the Rack PDU
in a clean environment, free of conductive contaminants,
moisture, flammable liquids, gases and corrosive substances.
•
Do not use the Rack PDU in moist environments. If the
Rack PDU is exposed to moisture, immediately
disconnect the Rack PDU from DC input power by
opening the circuit breaker or removing the fuse or
breaker supplying DC input to the Rack PDU. Send the
Rack PDU to the manufacturer for inspection.
•
Do not use the Rack PDU for household applications.
Installation and Operation
Improper installation and operation may cause overheating and
lead to increased fire hazard. It may also destroy the device and
damage other connected systems.
•
Installation and start-up must be performed by a
qualified service engineer.
•
Make sure that the total input current of the connected
systems does not exceed the current rating specified on
the rating plate of the Rack PDU.
Electrical Safety
Damaged Rack PDUs or connected cables increase the risk of
electric shock or smoldering fire.
•
Check the unit for external signs of damage prior to start-
up operation! Do not operate the device if you detect
any damage or other deficiencies.
•
Only use the supplied DC input power cable.
Personal Safety
Careless handling increases the risk of electric shock.
•
Never touch the outlets or the Rack PDU with wet or
moist hands.
Service
Repairs should only be performed by qualified service technicians.
Unauthorized changes, modifications, or repairs of the device are
performed at the owner’s risk and will void all warranty claims.
•
Do not open the Rack PDU.
•
Please contact the nearest customer service center in
case of malfunction! Damage and defects must be
repaired immediately.
•
Always disconnect the unit from power before
troubleshooting.
Warning
