Vertiv 1R481000, User Manual

Page: 17 / 24

Vertiv™ Rectifier Module User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp. 11
2 Operation
2.1 AC Input Protection Device Requirements/Recommendations
Refer to the system documentation supplied with the system the rectifier is installed in.
2.2 Local Indicators
Location and Identification: Refer to Figure 2.1 .
Description: There are three (3) indicators located on the rectifier’s front panel. The functions of these indicators are as shown in
Table 2.1 .
Figure 2.1 Local Indicator Locations
Table 2.1
Local Indicators
Indicator Normal State Alarm State Alarm Cause
Power
(Green)
On
Off
No input voltage.
Internal input fuse open.
Flashing The rectifier is being identified by the controller.
Protection
(Yellow)
Off
On
AC input under/over voltage.
PFC output under/over voltage.
Moderate load sharing imbalance.
Rectifier not inserted into the slot completely.
Rectifier over-temperature protection.
Rectifier in ECO Standby Mode when ECO Mode is active in
controller.
Flashing
Loss of communication with controller (the rectifier can provide
power).
Alarm
(Red)
Off
On
Severe load sharing imbalance.
Rectifier output disabled for any reason, including overvoltage
shutdown and internal output fuse open.
Rectifier addresses contradictory.
Flashing Fan not operating (rectifier shuts down).
Power Indicator
(Green)
Protection Indicator
(Yellow)
Alarm Indicator
(Red)