Vertical Edge 9200 Series Phone
User Guide
40
5.6 Two-Way Record: Recording a call
You may record an active external/Internal conversation in your
Voice Mail Box
. During recording a call, the LED of the Flex
Record button is flashing.
Before using the recording, the following admin have to be
checked:
1. Station Data > Station VM Attribute (PGM 127)
1) VSF Aceess: Enable.
2) Two War Record: ON.
3) Automatic Talk Recording Destination: VSF group No.
4) Automatic Talk Recording Option (OFF/ALL/CO)
-
If this option is set to OFF, User can press the
programmed
Record
button to record.
-
If this option is set to ALL, User can record all
conversation without pressing the programmed
Record
button.
-
If this option is set to CO, User can record the
external call without pressing the programmed
Record
button.
2. Station Group Data > Station Group Assignment (PGM 190)
1) The above
‗Automatic Talk Recording Destination‘ is
assigned. e.g. *401 as group number
2) Select the group type: VSF-VM
To assign {Two Way Record} Flexible button:
TRA NS/PGM
+ {FLEX} +
TRA NS/PGM
+ 80 +
HOLD/SAV E
To activate Two-Way Record while on a call:
Press the programmed
Record
button, record warning tone is
heard and recording starts.
To stop Two-Way Record while on a call:
Press the programmed
Record
Soft button or,
Hang-up, return to idle.
To play Two-Way Record:
Press the
C
ALL
B
ACK
button,
Select the VSF MSG to use Volume button or Navigation key
Enter the station number and Password.
User can check the recoding.
