Vertical Edge 9200 Series Phone
User Guide
28
When dialing on a CO line which uses pulse style signals, you
may activate
Dial Pulse to Tone Switchover
changing to DTMF
style dialing (for banking services, etc.). CO Line singnal (DTMF
or Pulse) can be set in PGM 141.
When placing an IP call, you must d
ial an IP address using the ‗*‘
key in place of the dot.
If
Least Cost Routing
is set-up, the number you dial will be
analyzed and the system will place the call on the least expensive
route.
You may be assigned
Dialing
and/or
CO/IP Line Access
Restrictions
, in which case you will receive error tone if you
attempt to dial or access a restricted number/CO/IP line.
CO/IP
line
and
Station Class Of Service (COS)
, which establish
dialing restrictions, may vary during Day and Night operation
(
Day/Night COS
).
You may need to enter an
Authorization code
before placing
calls, in which case you will receive a second dial tone.
Your external calls may be subject to
Call Time Restrictions
(PGM 111: ON)
, you will receive a
Call Warning Tone
prior to
disconnect.
NOTE
—In the event of an emergency, assigned Emergency
numbers (ex., 911 call) may be dialed from any station in the
System regardless of a Station’s dialing restrictions (COS).
To place an external call:
Lift the handset,
Dial the CO/IP line/group,
Dial the desired number.
4.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you will
receive an All Trunks Busy signal. You may request to be
notified when a line becomes free.
To activate a queue if the selected/dialed line is busy:
Select the desired CO/IP line button; when the busy
notification is returned, press the
Call Bac k
button,
Return to an idle state by going on-hook; when the line is
available, the Station will be notified (ringing).