Form: Man10G107 Rev. –C-
02-06-2012
4
11.
ALWAYS
wear eye protection and have a fire extinguisher near by while annealing. The
use of heat resistant gloves such as those sold at welding supply stores is also necessary.
Never wear cotton, latex or any other type of glove that is not heat resistant. They may melt
to your hands or catch on fire causing severe and or permanent damage.
12.
ALWAYS
unplug your unit
FIRST
from the electrical source and then disconnect the fuel
supply from your torches. Also, be sure to connect your fuel supply
FIRST
then wait a few
minutes before plugging in the Power Supply that came with your unit. Minute amounts of
fuel vapors may be present and must dissipate prior to any electrical connection to the
machine.
13.
ALWAYS
replace a blown fuse with one of the same ratings as supplied with your unit.
DONOT replace the fuse supplied with one larger than shown on the OPERATOR PANEL
just above the fuse holder. This may lead to destruction of your power supply or worse yet,
cause harm to your power outlet.
14.
ALWAYS
select a safe & secure storage place to prevent unauthorized use or misuse by
someone not familiar with your annealer. If you loan your unit to a friend, include this
manual and caution them to the dangers involved.
15.
ALWAYS
remember, shooting and reloading are fun recreational activities as long as we
stay safe. A little common sense will go a long way toward safety and enjoyment of our
sport. We want you to be a
BENCH-SOURCE
customer for a long time to come!
REMEMBER: SAFETY FIRST. PAY ATTENTION!
If you have problems, concerns, questions or comments,
BENCH-SOURCE
is here for
you. Please contact us anytime via the methods below……..
EMAIL:
Click on the “CONTACT US” Tab on
OUR WEB SITE: www.bench-source.com
PHONE: 662-895-0803
FAX: 662-895-6317
HOURS of OPERATION:
8:30 A.M. – 5:00 P.M. Central Standard Time Monday~Friday
Or
Write to:
Vertex Manufacturing Corporation
PO Box 949
Olive Branch, MS 38654-0949