Vertex Standard VXR-1000, Service Manual

Page: 11 / 54

11
This document outlines the interconnections and
hardware settings required for interface of the
Vertex VXR-1000 Compact Mobile Repeater to
the Vertex VX- series of mobile transceivers in a
trunked environment (using the Vertex VX-
Trunk System).
The illustration below outlines the basic configu-
ration of a VX-Trunk system, using the VXR-1000
as a range extender for a portable transceiver.
VXR-1000 Trunking Interface Manual
1. E
QUIPMENT
R
EQUIRED
Portable Transceiver : Must have a DTMF En-
coder installed.
Mobile Transceiver : Must be configured for
operation within VX-
Trunk System. Compat-
ible models include FTL-
7011, VX-2000, and VX-
3000. Please refer to the
VX-Trunk System docu-
mentation for configura-
tion details for the mo-
bile transceiver.
2. I
NTERCONNECTIONS FROM
VXR-1000
TO
M
OBILE
T
RANSCEIVERS
2-1: Interconnections to FTL-7011/Configuration
2-1-1: VXR-1000 Internal Jumpers
JP1004 Open
JP1005 Jumpered
2-1-2: VXR-1000 Interconnections to FTL-7011
2-2: Interconnections to VX-2000/Configuration
2-2-1: VXR-1000 Internal Jumpers
JP1004 Open
JP1005 Jumpered
2-2-2: VX-2000 Internal Jumpers
JP1002 Jumpered
JP1003 Open
JP1004 Open
JP1005 Open
JP1007 Open
JP1008 Open
JP1009 Open
Connect a jumper from Pin 3 of J1003 to
the shared side ofJP1009/Pin 4 of J1007.
Remove R1010
Connect a jumper from Pin 7 of J1003 to
the shared side of JP1008/Pin 1 of J1007.
Connect a jumper between Pin 4 of J1003
and Pin 6 of the connector of the VTM-20
Trunking Controller board.
2-2-3: VXR-1000 Interconnections to VX-2000
The chart below describes the individual
wire functions for the cable connected be-
tween the D-Sub 9-pin connectors on the
VXR-1000 (J1004) and VX-2000 (J1003).
VXR-1000 DSUP 9-pin
Accessory Connector
FTL-7011
Pin 1: GND Pin 8 of J2006
Pin 2: Mobile Transmit Audio Pin 4 of J2006
Pin 3: Power Supply Control Pin 12 of J2006
Pin 4: Mobile PTT Output Pin 1 of J2006
Pin 5: Vcc (13.8 V) Pin 9 of J2006
Pin 6: Mobile Receive Audio Pin 3 of J2001
Pin 7: Mobile COR Detect Pin 1 of J2001
Pin 8: Mobile Microphone Audio No Connection
Pin 9: Mobile TX detect/Mobile Mic. PTT No Connection
VXR-1000 DSUP 9-pin
Accessory Connector
VX-2000
Pin 1: GND Pin 5 of J1003
Pin 2: Mobile Transmit Audio Pin 3 of J1003
Pin 3: Power Supply Control Pin 8 of J1003
Pin 4: Mobile PTT Output Pin 7 of J21003
Pin 5: Vcc (13.8 V)
Switched 13.8V
DC output from
the Power Switch
Pin 6: Mobile Receive Audio Pin 2 of J1003
Pin 7: Mobile COR Detect Pin 4 of J1003
Pin 8: Mobile Microphone Audio No Connection
Pin 9: Mobile TX detect/Mobile Mic. PTT No Connection