VXA-300 P
ILOT
III
O
PERATING
M
ANUAL
46
01
[
SQL
]
Function
: Squelch Level Setting.
Available Values
: 0 ~ 8
Default Setting
: 6
Select a setting for this Menu item which just silences the
receiver when no signal is present. Use the lowest setting
which will keep the receiver quiet between incoming trans-
missions.
02
[
MCLR
]
Function
: Memory Channel Clear (“MR” memory only).
To clear a Memory channel:
Select the Menu Item
MCLR
.
Press the
VOLUME
knob, then rotate the
DIAL
se-
lector knob to recall the memory channel to be erased.
Press the
VOLUME
knob to clear the Memory chan-
nel (the Memory channel number will return to
“
001
”).
Important Notice
: An “erased” channel cannot be restored,
and “
CH-001
” cannot be erased, as it is used for “Priority
Channel” operation.
M
ENU
(
“S
ET
”
)
M
ODE
03
[
RESM
]
Function
: Scan-Resume Mode Setting.
Available Values
: 5S/CAR
Default Setting
: 5S
“5S” (5-Second Pause) mode
:
the scanner will halt for
five seconds only, after which scanning will resume
(whether or not the other station is still transmitting).
“CAR” (Carrier Drop) mode
:
the scanner will remain
halted for as long as there is a carrier present on the chan-
nel; after the carrier drops at the end of the other station’s
transmission, the scanning will resume.
04
[
SCNL
]
Function
: Scan Lamp On/Off (while paused).
Available Values
: on/oFF
Default Setting
: on
If you set this function to “on,” the lamp will be illumi-
nated whenever the scanner pauses. The lamp will go off
automatically when scanning resumes.
