VXA-300 P
ILOT
III
O
PERATING
M
ANUAL
28
M
EMORY
O
PERATION
The
VXA-300
provides 150 user-programmable “Main”
memories, labeled “
CH-001
” through “
CH-150
,” and
up to 100 pre-programmed memories, designated “Book”
Memories. The “
” icon appears when the “Book”
Memory Mode is activated.
The Main memories and “Book” Memories can be assigned
alpha-numeric names of up to eight characters.
Memory System Operation
The
VXA-300
’s Main Memory system allows the user to
store, label, and recall channel frequencies which you may
want to use frequently. You may store VFO frequencies,
Book Memory frequencies, and/or Weather Channel fre-
quencies (USA version only) into the Main Memory sys-
tem.
Memory Storage
Select the desired frequency in the VFO mode, or re-
call the Book Memory channel or Weather channel to
be stored in the Main Memory.
Press and hold in the
[
MW
(
SPL-W
)] key for
2 seconds. The display
will indicate “
CH-XXX
”
and a channel number
will blink on the LCD.
Within five seconds of
pressing the [
MW
(
SPL-W
)] key, rotate the
DIAL
selector knob to select the desired memory channel
number for storage.
In order to prevent writing over memory channels, a
small “ ” icon will appear at
the right side of the channel
number to indicate a vacant
memory channel.
Now press and hold in the [
MW
(
SPL-W
)] key for 2
seconds; you will now see blinking “
A
” on the LCD.
To attach an alpha/numeric name (label) to the
memory, proceed to the next step; otherwise press and
hold in the [
MW
(
SPL-W
)] for 2 seconds to save the
entry and exit.
