VX-920ATEX S
ERIES
O
PERATING
M
ANUAL
11
Rotate the
VOL/PWR
knob to set the volume
level. If no signal is
present, press and hold in
the
MONITOR
button
(under the
PTT
switch)
more than 2 seconds;
background noise will
now be heard, and you
may use this to set the
VOL/PWR
knob for the
desired audio level. Press
and hold the
MONITOR
button more than 2 sec-
onds (or press the
MONITOR
button
twice
) to
quiet the noise and resume normal (quiet) moni-
toring.
To transmit, monitor the
channel and make sure it
is clear.
Press and hold the
PTT
switch. Speak into the mi-
crophone area of the front
panel grille (above the upper left edge of the LCD)
in a normal voice level. To return to the Receive
mode, release the
PTT
switch.
Do not transmit the radio without an
antenna connected.
Press the (Orange)
TOP
SEL
key or
SIDE SEL
key (above the
P T T
switch) to activate one of
the preprogrammed func-
tions which may have
been enabled at the time
of programming by the
dealer. See the next sec-
tion for details regarding
the available features.
Switch the top panel’s
TOGGLE
switch to the
[
A
], [
B
], or [
Center
] po-
sition to activate one of
the pre-programmed
functions which may
have been enabled at the time of programming by
the dealer. When this switch is in the [
A
(left)],
[
B
(right)], or [
Center
] position, the feature pro-
grammed (by your dealer) to that switch position
will be activated. See the next section for details
regarding the available features.
O
PERATION
