VX-920ATEX S
ERIES
O
PERATING
M
ANUAL
20
“
-SCAN Stop-
” will appear on the LCD for one sec-
ond after pressing the assigned programmable key.
C
HANNEL
U
P
/D
OWN
Press the assigned programmable key to select a dif-
ferent channel within the current group.
S
ET
Press the assigned programmable key to activate the
“User Set” (Menu) Mode. See page 20 for details
CALL/RESET
While the DTMF Paging System
This feature, if enabled, allows the user to change
the 3-digit Page Call code, used to call other simi-
larly-equipped stations. Press the assigned program-
mable key, followed by the three digits representing
the Page Call code of the station you wish to call.
Three tones will be heard after the last key is pressed
(the new code will now be transmitted).
The receiver squelch of the other station will be
opened, and you can begin communication.
While the 2-Tone/5-Tone Paging System
This feature, if enabled, press the assigned program-
mable key to send a 2-tone/5-tone sequential tone.
C
ALL
1
TO
C
ALL
5
Press the assigned programmable key to send a 2-
tone/5-tone sequential tone group which is pre-de-
fined.
C
ODE
U
P
/D
OWN
Press the assigned programmable key to select a 2-
tone/5-tone encode code from the pre-defined encode
list.
C
ODE
S
ET
Press the assigned programmable key to change the
encode digits for 5-tone operation. To change a spe-
cific digit, select the desired digit using the [
A
] key,
then change the number using the [
B
]/[
C
] keys, and
store the number using the [
D
] key.
S
PEED
D
IAL
(
16-
KEY
VERSION
ONLY
)
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the assigned programmable
key, then press the front panel’s numeric key corre-
sponding to the Auto-Dial memory number list pro-
vided by your Dealer or Network Administrator. The
DTMF tones sent during the dialing sequence will
be heard in the speaker.
A
DVANCED
O
PERATION
